Z-60 FE & Z-60 DC

Articulated Boom Lifts

Genie Z-60/37 DC or FE articulating boom lift

The Genie® Z®-60 FE fuel-electric hybrid articulating boom lifts and the Genie® Z®-60 DC all-electric articulating boom lifts are ideal for outdoor and indoor applications that demand low noise and clean performance, such as construction sites, sports arenas, malls, facilities, and even challenging pedestrian areas. 

Overview

  • The 5-ft (1.52 m) jib features a 135° range of motion to accurately position workers
  • Genie Fast Mast™ boom system allows operators to descend and retrieve materials and to quickly return to work at height
  • 4WD and full-time active oscillating axles provide traction for gradeability up to 45%
  • Proportional control system allows for quick, precise access to work areas for increased productivity
Specification Value
Max Working Height 65 ft 7 in | 20.16 m
Max Horizontal Reach 36 ft 7 in | 11.15 m
Max Up and Over Clearance (riser extended) 24 ft 3 in | 7.39 m
Below Ground Reach 8 ft 1 in | 2.46 m
Platform Capacity 500 lb | 227 kg
Range of motion - Genie Z-60/37 DC and FE articulating boom lifts

Chassis Options

  • Tow package

Tires Options

  • Rough terrain foam-filled tires (water based)
  • Foam-tire fill  (petroleum based)

Engine Options

  • Cold weather kit: 5W-40 synthetic engine oil, battery heater, engine block heater: FE Hybrid only

Lift/Turntable Options

  • FLA (flooded lead acid) batteries: standard on DC
  • AGM maintenance-free batteries: standard on FE Hybrid
  • Specialty hydraulic oil  (28gal - cold weather, fire resistant,  or biodegradable)
  • Power inverter, 2000W, 120V AC, 60 Hz
  • Hostile environment kit: cylinder bellows, boom wiper seals and control box covers

Platforms

  • 4 ft. 8 in. front-entry steel platform
  • 8 ft. tri entry platform with side swing gate
  • Platform with ½ height mesh inserts

Platform Options

  • Air line to platform:  ? in. inner diameter
  • Aircraft protection kit:  platform foam padding and padded disable system
  • Aircraft protection kit: with swing gate
  • Light package: 2 chassis mounted drive lights, 2 platform mounted work lights
  • Lockable platform and ground control box covers
  • Panel cradle package
  • Platform auxiliary top rail
  • Thumb rocker steering
  • Traveling fall arrest anchor system: requires 6ft platform
  • Traveling fall arrest anchor system: requires 8ft platform

Aerial Pros Tile Thumbnail

Load Sense on Scissor Lifts

Genie® GS™ slab scissor lifts are designed to deliver reliability and performance on the jobsite, and for your rental business.

Continue Reading

...
Aerial Pros Tile Thumbnail

How to Properly Maintain Your Genie® Telehandler

Genie was excited to introduce the updated Genie® GTH™-1056 telehandler to its line-up earlier this year. But even new equipment needs regular maintenance to ensure that it's running at peak-performance levels.

Continue Reading

...
Aerial Pros Tile Thumbnail

Changes to Genie® Booms You Need to Know About

When the new ANSI A92 (United States) standards went into effect, driving alignment with ISO standards globally (including European EN280, Australian AS 1418.10 and Canadian CSA B354 standards), it impacted the way Genie® aerial access equipment is designed, manufactured, maintained and operated globally.

Continue Reading

...
Aerial Pros Tile Thumbnail

Choosing the Right Material Lift

Having a diverse equipment fleet to meet the needs of a wide range of professionals is an essential component to help manage the ebb and flow of regular economic cycles.

Continue Reading

...
Aerial Pros Tile Thumbnail

Genie Safety Minute: Overhead Obstructions

Genie Safety Minute is intended to facilitate health and safety discussions on the job site.

Continue Reading

...