S-60 XC and S-65 XC
Able to perform a wider range of heavier lift tasks on construction and industrial jobsites with Genie® S®-60 XC™ and S-65 XC telescopic booms — offering a dual lift capacity of 660-lb (300 kg) unrestricted and...
S-80 XC and S-85 XC
Genie® S®-80 XC™ and S®-85 XC telescopic booms offer a dual lift capacity of 660-lb (300 kg) unrestricted and 1,000-lb (454 kg) restricted to perform a wider range of heavier lift tasks on construction and industrial jobsites. And, the Genie Xtra Capacity™ (XC) feature lets up to three people work onboard while still leaving room for tools and jobsite materials.
Overview
- Maximum capacity with a robust jib design to handle increased loads
- Load sense technology for accurate load weighing and zero-load field calibration
- Chassis tilt sensor technology maximizes access to hard-to-reach work areas
- Onboard diagnostics maximizes serviceability
- Option to add the new Genie Lift Power™ generator system
| Specification | Value |
|---|---|
| Max Working Height | S-80 XC: 86 ft / S-85 XC: 91 ft | S-80 XC: 26.38 m / S-85 XC: 27.91 m |
| Max Horizontal Reach | S-80 XC: 68 ft 6 in / S-85 XC: 74 ft 6 in | S-80 XC: 20.88 m / S-85 XC: 22.71 m |
| Below Ground Reach | S-80 XC: 5 ft 6 in / S-85 XC: 8 ft 8 in | S-80 XC: 1.68m / S-85 XC: 2.64 m |
| Platform Capacity | 660 lb Unrestricted, 1000 lb Restricted | 300 kg Unrestricted, 454 kg Restricted |
| Machine Width and Length | S-80 XC: 8ft 2 in, 37 ft 7 in / S-85 XC: 8 ft 2 in, 40 ft 7 in | S-80 XC: 2.49 m, 11.3 m / S-85 XC: 2.49 m, 12.37 m |
Chassis Options
- Tow package
Tire Options
- Rough terrain, foam-filled tires (petroleum based)
- Rough terrain, non-marking, foam-filled tires (water based)
- Rough terrain, non-marking, foam-filled tires (petroleum based)
Engine Options
- 70 hp GM Vortec 3.0L Gas/LPG Dual Fuel
- Diesel air intake pre-cleaner
- Cold weather recirc kit: 5W-40 synthetic engine oil, oil pan heater, battery heater, platform manifold recirculation and hydraulic tank heater
Lift/Turntable Options
- Specialty hydraulic oil (60 gal - cold weather, fire resistant, or biodegradable)
- LPG tank, 33.5 lb. capacity: duel fuel engine only
- Hostile environment kit: cylinder bellows, boom wiper seals, platform and ground control box covers
- Deluxe hostile environment kit: hostile environment kit, ring gear guard, cable track cable/hose cover, air pre-cleaner
Platforms
- 6 ft. dual entry or 8 ft. tri entry platform with ½ height mesh inserts and side swing gate
- 6 ft. dual entry platform with side swing gate
Platform Options
- Lift Power™ 3kW AC generator, 110V/60Hz or 220V/50Hz
- Air line to platform: ½ in. inner diameter
- Light package: 2 chassis mounted drive lights and 2 platform mounted work lights
- Lockable platform and ground control box covers
- Panel cradle package
- Platform auxiliary top rail
- Thumb rocker steering
- Lift Power™ 12kW Welder - Select Lincoln or Miller
- Lift Power™ 12kW Welder Ready package
- Traveling fall arrest anchor system: requires 6ft platform
- Traveling fall arrest anchor system: requires 8ft platform
Image and Video Gallery
Related Products, Attachments and Accessories
-
![Genie S-65 XC - Xtra Capacity telescopic boom lift]()
-
![Genie SX-105 XC - Xtra Capacity telescopic boom lift]()
SX-105 XC
The Genie® SX™-105 XC™ telescopic boom is engineered to work in more applications that require higher capacities. With industry-leading dual lift capacity — 660-lb (300 kg)/1,000-lb (454 kg) — and a smooth oper...
-
![Genie S-45 telescopic boom lift]()
S-40 and S-45
Genie® S®-40 and S®-45 telescopic booms increase productivity with the traction and drive speed needed to get around jobsites and work areas. These units are designed to easily maneuver in tight spaces on const...
-
![Genie Fall Arrest Bar]()
Genie® Fall Arrest Bar
The Genie Fall arrest bar* accessory for ANSI and CSA boom lifts is an exciting addition to any fleet. The fall arrest bar is available for either 6 ft. or 8 ft. platforms and quickly attaches on nearly all Gen... -
![Genie Lift Guard Contact Alarm]()
Genie® Lift Guard™ Contact Alarm
The Lift Guard™ Contact Alarm is designed to alert ground personnel when an operator makes contact with the platform control panel, interrupting boom movement, sounding an alarm and flashing a warning lig... -
![Genie Lift Power]()
Genie® Lift Power™
The Genie Lift Power™ system includes a new generation of hydraulically driven generators for your customers, and their operators, who relay on productive power at the platform to get their work done. ...
Related News
-
![Genie Scissor Lift]()
Clearing Up the Confusion: Fall Protection Requirements on Group B MEWPs
When it comes to using fall protection equipment for on mobile elevating work platforms (MEWPs), many still do not fully understand, or comprehend, the requirements in the ANSI A92 and CSA B354 standards, as well as the OSHA and OHS requirements, for fall protection on MEWPs in the United States and Canada.
Full Story of Clearing Up the Confusion: Fall Protection Requirements on Group B MEWPs -
![COPY IMAGE 2 - S-85_XC_Azzura-1199]()
Updated Training Requirements
One of the biggest challenges facing our industry today is how to increase awareness about why safety training is so important. As the North American aerial industry implements the new ANSI and CSA standards changes, companies need to understand their responsibilities regarding training requirements for Mobile Elevating Work Platforms (MEWPs).
Full Story of Updated Training Requirements -
ANSI & CSA Standards | Ask Me Anything June 10th-14th, 2019
Welcome to Ask Me Anything with Scott Owyen on the new ANSI and CSA Standards!
Full Story of ANSI & CSA Standards | Ask Me Anything June 10th-14th, 2019 -
Purchasing MEWPs Compliant with Regional Standards
In the United States, the Occupational Safety and Health Administration, or OSHA, is the primary enforcement agency for mobile elevated work platform (MEWP), or commonly known as aerial work platform (AWP), safety on the jobsite.
Full Story of Purchasing MEWPs Compliant with Regional Standards -
The Brand Matters When Purchasing Used MEWP Equipment
There are reasons some aerial work platforms (AWP) is considered a top-tier brand, maintains its value and garners a fairly premium price in the used market.
Full Story of The Brand Matters When Purchasing Used MEWP Equipment -
HBV, Spelle Germany Adds 105 Meters of Working Height to Its Fleet
This January, family-owned rental company HBV Hydraulikbühnen-Verleih GmbH (HBV), based in Spelle, northwestern Germany, received delivery of three Genie® Xtra Capacity™ (XC™) telescopic boom lifts.
Full Story of HBV, Spelle Germany Adds 105 Meters of Working Height to Its Fleet -
How Aerial Operator Protection Evolves
When developing new operator protection technology, you must reach beyond equipment and listen to the workers who are using it each and every day.
Full Story of How Aerial Operator Protection Evolves -
A92 Minute: Supervisor Training
Check out this Genie A92 Minute on conducting Supervisor Training in accordance with the updated ANSI A92 and CSA B354 Standards.
Full Story of A92 Minute: Supervisor Training -
![COPY IMAGE - Z-60-37FE-06]()
What Constitutes Proper MEWP Training?
One of the biggest challenges facing our industry today is how to increase awareness about why safety training is so important.
Full Story of What Constitutes Proper MEWP Training? -
![Genie TZ Boom]()
Recap of the Pending ANSI/CSA Standards - Everything is Changing
ANSI (United States) and CSA (Canada) standards have, for almost four decades, provided best practices for safe, reliable access to work at height and have delivered a consistent benchmark for safe machine design in North America.
Full Story of Recap of the Pending ANSI/CSA Standards - Everything is Changing -
![Genie Telescopic Boom]()
Big Changes Coming to ANSI A92 Standards
The new standards are based on an ISO model, so they are very similar to the current European EN280 standard. As a global manufacturer, Genie can leverage our experiences in Europe to help with the transition, but we have to remember that North American aerial operators are very different.
Full Story of Big Changes Coming to ANSI A92 Standards -
![Genie Telescopic Boom]()
Start Preparing Now for the New Aerial Standards Coming
With Tier 4 emissions standards compliance underway, we now need to turn our attention to the next “big thing” to impact the aerial rental market — pending changes to the ANSI A92/CSA B354 standards series* (which cover all North American aerials).
Full Story of Start Preparing Now for the New Aerial Standards Coming -
![Genie Z Boom]()
How Industry Regulations and Standards Work
With the pending changes to ANSI 92* and CSA B354 standards, there is a need for education in the aerial market about the implications of the new standards, as well as how they will work with current industry regulations.
Full Story of How Industry Regulations and Standards Work -
![Genie GRC]()
Language and Terminology Changes in the ANSI A92 and CSA B354 Standards Updates
ANSI A92 and CSA B354 standards are about to get a facelift. Pending standards changes, which are estimated to go into effect this year, are written to be more in line with the ISO model so standards will be in global alignment for trade and exporting.
Full Story of Language and Terminology Changes in the ANSI A92 and CSA B354 Standards Updates -
![Genie Articulated Boom Lift]()
Changes to the ANSI and CSA Standards You Need to Know About
The current ANSI and CSA standards for safe use and training have not been updated for many years (the current ANSI boom, scissor lift and manually propelled standards were last updated in 2006, and CSA standards go back even further).
Full Story of Changes to the ANSI and CSA Standards You Need to Know About -
![Genie Stick Boom]()
Eight Stages of Risk Assessment
With so much changing in the updated ANSI/CSA standards, it is important to call attention to one key item that every user (identified in the standards as employers) needs to be aware of.
Full Story of Eight Stages of Risk Assessment -
![Genie Z Boom]()
Frequently Asked Questions About the Upcoming ANSI/CSA Standards Changes
With the pending changes to the ANSI A92 and CSA B354 estimated to go into effect in 2020, it is important for you to start preparing your business and your customers now for what will be different.
Full Story of Frequently Asked Questions About the Upcoming ANSI/CSA Standards Changes -
![Genie Scissor Lift]()
Big Changes, Little Changes Are Coming
In addition to the terminology and language changes in the new ANSI A92 and CSA B354 standards, which are projected to go into effect in 2020, the standards also include several big changes to the equipment itself.
Full Story of Big Changes, Little Changes Are Coming -
![Genie Load Sense]()
Preparing for Platform Load Sense
Changes to ANSI A92 and CSA B354 standards are coming; we expect to the standards to go into effect in 2020. One of the more significant equipment changes coming from the updated standards will be the addition of platform load sense.
Full Story of Preparing for Platform Load Sense -
![Genie Stick Boom]()
Responding to the New Normal
Changes to North American standards (ANSI A92 in the United States and CSA B354 in Canada) are expected to come in 2018 and will create a new “normal” for mobile elevated work platforms (MEWPs), formerly known as aerial work platforms (AWPs), worldwide.
Full Story of Responding to the New Normal -
![Genie Z-33/18]()
Addressing the Challenges of the Upcoming Changes to the ANSI A92 Standards
The upcoming implementation of the new ANSI A92.22 Safe Use and A92.24 Training Standards for Mobile Elevating Work Platforms (MEWPs) in the United States is creating quite a bit of confusion in the industry.
Full Story of Addressing the Challenges of the Upcoming Changes to the ANSI A92 Standards -
Case Study: Electrical Training Alliance Partners with Genie to Offer Aerial Operators’ Training for the New Generation of Apprentices and Journeymen
Full Story of Case Study: Electrical Training Alliance Partners with Genie to Offer Aerial Operators’ Training for the New Generation of Apprentices and Journeymen
