SX-135 XC

Genie SX-135 XC telescopic boom lift

The Genie® SX™-135 XC™ telescopic boom lift provides 3 m (10 ft) more outreach and 32 per cent more capacity across its full working envelope than typical self-propelled booms of this size. Thanks to its unique up-and-over style capability, operators will easily navigate any obstacles at height.

Overview

• Mini Genie XChassis™ design for easy transport
• 5.48 m to 9.14 m (18 to 30 ft) telescoping Jib-Extend™ with 125˚ articulation, for an increased range of motion
• Dual lifting capacity of 300 kg (660 lb) and 454 kg (1,000 lb) to lift increased loads and up to 3 operators
• Impressive outreach (27.43 m - 90 ft) and below-grade (6 m - 19 ft 8 in) capabilities
• Automatic envelope control and chassis tilt sensor technology for smooth operation
• Zero-load field calibration and onboard diagnostics maximize serviceability

Specification Value
Max Working Height 141 ft | 43.15 m
Max Horizontal Reach 90 ft | 27.43 m
Below Ground Reach 19 ft 8 in | 6.00 m
Platform Capacity 660 lb Unrestricted, 1000 lb Restricted | 300 kg Unrestricted, 454 kg Restricted
Machine Width and Length 12 ft 11 in / 64 ft 10 in | 3.94 m / 19.76 m
Genie SX-135 XC - Range of Motion Chart

Aerial Pros Tile Thumbnail

Characteristics of the Genie® Stage V Engine Solution

When Stage V engine standards took effect as of January 1st, 2019, it impacted the majority of Genie® machines, including GTH™ telehandlers, higher horsepower S® and Z® boom lifts and GS™ rough-terrain scissor lifts.

Continue Reading

...
Aerial Pros Tile Thumbnail

Daily To Do’s: Perform function tests on Genie® MEWPs

Performing function tests is a crucial part of safe work practices before operating any mobile elevating work platform (MEWP) because function tests are designed to discover malfunctions before the MEWP is put into service.

Continue Reading

...
Aerial Pros Tile Thumbnail

The Right Boom Lift Option for Any Jobsite Need

Every jobsite has its unique challenges and requirements; there is a lot of variety in the type of work that end-users are doing.

Continue Reading

...
Aerial Pros Tile Thumbnail

Recommendations for Preventing the Spread of COVID-19 on Aerial Jobsites

The first, and number one, goal of all aerial jobsites should be to provide a safe and productive work environment for workers and equipment.

Continue Reading

...
Aerial Pros Tile Thumbnail

Daily To Do’s: Perform Pre-Operation Inspections on Genie® MEWPs

A pre-operation inspection is a visual inspection of a mobile elevating work platform (MEWP) performed by the operator prior to each work shift.

Continue Reading

...