S-40 XC and S-45 XC
Able to perform a wider range of heavier lift tasks on construction and industrial jobsites with Genie® S®-40 XC™ and S-45 XC telescopic booms — offering a dual lift capacity of 660-lb (300 kg) unrestricted and...
Able to perform a wider range of heavier lift tasks on construction and industrial jobsites with Genie® S®-60 XC™ and S-65 XC telescopic booms — offering a dual lift capacity of 660-lb (300 kg) unrestricted and 1,000-lb (454 kg) restricted. The Genie Xtra Capacity™ (XC) feature lets up to three people work onboard with room for tools and jobsite materials.
Overview
Due to the delays in updating the ANSI A92 standards, Genie has temporarily suspended the production of the new Genie® S-60 XC™, S-65 XC and Z-45 XC booms*. Current Genie S-60, S-65 and Z-45 models will continue to be available for purchase until further notice.
* Please check back often for production updates on these units.
Specification | Value |
---|---|
Max Working Height | S-60 XC: 66 ft / S-65 XC: 71 ft | S-60 XC: 20.30 m / S-65 XC: 21.80 m |
Max Horizontal Reach | S-60 XC, 50 ft 10 in / S-65 XC, 54 ft 2 in | S-60 XC, 15.49 m / S-65 XC, 16.51 m |
Below Ground Reach | 5 ft 7 in | 1.70 m |
Platform Capacity | 660 lb Unrestricted, 1,000 lb Restricted | 300 kg Unrestricted, 454 kg Restricted |
Machine Width and Length | 8 ft 2 in, 31 ft 11 in | 2.49 m, 9.73 m |
Chassis Options
Tire Options
Engine Options
Lift/Turntable Options
Platforms
Platform Options
Investing a little time in training to gain a lot more later is a basic principle that most far-sighted entrepreneurs agree upon for two simple reasons
Continue Reading
For equipment owners, a fully and properly maintained mobile elevated work platform (MEWP) can mean reduced downtime, increased utilization, better rental rates and higher residual values. But, performing maintenance to a high standard requires the right knowledge and training.
Continue Reading
“Load sense” is likely a term you’ve been hearing more of lately. But, what is the primary purpose of load sense, and why does it matter when you’re operating a mobile elevating work platform (MEWP)?
Continue Reading
Transporting a large piece of aerial equipment can be a challenge, and safety is the key ingredient.
Continue Reading
Soon all Genie® GS™ scissor lifts and GR™, QS™ & GRC vertical mast lifts will be manufactured in compliance with applicable national standards adopted by each country, which drive differences to machine design.
Continue Reading