- Boom & Scissor Accessories
Genie® Platform Control Box CoverA hinged cover to pull down over the platform controls when the boom is not in operation.
ApplicationThis accessory helps to prevent loose debris from getting into the control box.
Genie® Auxiliary RailThis accessory is an additional railing system that can be quickly and easily mounted on the outside of a Genie boom’s standard platform rails.
ApplicationThis railing system adds an extra measure of security for the operator when working at height.
122278GT – 6 ft (1.8 m) platform with swing gate
122279GT – 8 ft (2.4 m) platform with swing gate
Genie® Lift Tools™ Access Deck for Scissor Lifts
Many jobsites require operators to access restricted areas above or beyond where a scissor lift’s platform can reach. This accessory provides operators with a secondary surface to elevate them above the platform floor for a productive solution to access hard-to-reach areas.Click here for more information
ApplicationThis additional deck has a 225-lb (102 kg) capacity, and installs to the inside of the extension deck guardrails on Genie® GS™-1930 scissor lift platforms, with additional model compatibility in the future. It is designed with a collapsible guardrail to ensure uninhibited maneuverability for operators using this new accessory.
- KIT Number: 1291517GT
Genie® Lift Tools™ Access Deck – Booms
The new Genie® Lift Tools™ Access Deck for boom lifts provides operators with a secondary surface to work from, elevating them 22 in (0.56 m) above the platform floor. Attached to the platform midrail, this additional access enables operators to get into restricted spaces to increase productivity.Click here for more information
Providing more than 3 sq ft (0.27 m) of additional work area in the platform, this accessory is designed for use on jobsites where operators in a standard boom platform cannot reach their work. This additional access is ideal for use in HVAC, electrical, lighting, plumbing and welding applications, as well as between rafters or other structures at height. It is rated for both indoor and outdoor use.
KIT Number: 1291798GT
Genie® Lift Guard™ Contact Alarm for Slab Scissors and Vertical Mast Lifts
Available for Genie® GS™ slab scissor lifts and Genie GR™ and GRC™ vertical masts. This optional electronic secondary guarding solution is designed to activate when an obstruction makes contact with an activation whisker mounted to the mobile elevated work platforms (MEWPs) guardrails, alerting operators, occupants and ground personnel to a potential hazard.
Click here for more information
Click here to see how it works
ApplicationOperator safety and productivity are key considerations in the Genie design process. This system is designed to supplement a trained operator’s situational awareness and provide a secondary layer of guarding while working at height.
- 1288736GT KIT, Contact Alarm, GS-1530
- 1288737GT KIT, Contact Alarm, GS-1930
- 1288738GT KIT, Contact Alarm, GS-2032
- 1289293GT KIT, Contact Alarm, GS-2632
- 1289294GT KIT, Contact Alarm, GS-3232
- 1289420GT KIT, Contact Alarm, GS-2046
- 1289421GT KIT, Contact Alarm, GS-2646
- 1289422GT KIT, Contact Alarm, GS-3246
- 1289295GT KIT, Contact Alarm, GS-4047
- 1294000GT KIT, Contact Alarm, Genie GR™ and GRC™ vertical masts
Genie® Lift Tools™ Material CarrierThe new Genie® Lift Tools™ Material Carrier attachment offers Genie GS™-2669, GS-3369 GS-4069, GS-3390, GS-4390 and GS-5390 DC and RT rough terrain scissor lift operators a solution to efficiently carry materials to jobsites. Designed to accommodate a wide range of materials and higher load capacities than a standard pipe cradle attachment, this new Genie accessory is ideal for use in applications that require lifting materials to height, such as tilt-up construction, post-frame building construction, fire suppression installation, HVAC installation, rooftop contracting and facility maintenance.
ApplicationThe large carriage and high capacity of the Genie Lift Tools Material Carrier attachment is suitable for multitude of material types, including lumber, pipe, HVAC materials, siding and plate material.
- KIT 1288239GT, available as an aftermarket part
Genie® Lift Tools™ Expo InstallerDesigned to make operators more efficient when working at height, the Genie® Lift Tools™ Expo Installer allows for precise, easy placement of signs, banners and hanging décor. Ideal for use in convention centers, arenas, malls, theaters and other locations that decorate with suspended ornamentation, this new accessory helps to maximize safe productivity while operating Genie booms.
ApplicationThis is an indoor-use only aftermarket accessory, available through Genie Genuine Parts, designed for 6-ft and 8-ft articulating and telescopic boom platforms. This new option allows operators to hang signs, banners and décor at height.
- 1285719GT 6ft KIT ANSI/CSA Word Decals
- 1290034GT 6ft KIT CSA French Decals
- 1288801GT 8ft KIT ANSI/CSA Word Decals
- 1290036GT 8ft KIT French Decals
Genie® Lift Guard™ Platform Mesh Accessories
Genie® protective solutions continue to evolve to meet the demands of today’s aerial jobsites. The Genie Lift Guard™ Platform Mesh family of accessories is designed to prevent dropped objects falling from aerial worksites. With two options to choose from — half-height aluminum and full-height aluminum, these contemporary mesh accessories engineered to help operators keep jobsite materials and tools from falling out of boom platforms working at height.Lift Guard™ Platform Mesh
ApplicationHelps operators keep job-site material and tools from falling out of articulated and telescopic boom platforms working at height.
- 1283049GT Kit, 8’ Full Mesh, Side Gate
- 1286622GT Kit, 6’ Full Mesh, Side Gate
- 1290896GT Kit, 8’ Full Mesh, Front Gate
- 1290895GT Kit, 6’ Full Mesh, Front Gate
- 1275281GT Kit, 8’ Half Mesh, Side Gate
- 1275282GT Kit, 6’ Half Mesh, Side Gate
- 1290894GT Kit, 8’ Half Mesh, Front Gate
- 1290893GT Kit, 6’ Half Mesh, Front Gate
Genie® Tech Pro™ LinkWith the Genie Tech Pro™ Link diagnostics tool, everything you need to know is right in the palm of your hand. It allows users to monitor a machine's gauges, including engine temperature, oil pressure, fuel levels and battery voltage, calibrate the machine, make speed adjustments during pre-operation inspection, get service alerts and reminders, track maintenance intervals, receive fault code information and so much more - all from the palm of your technician's hand. The information is readily available without having to navigate layers and layers of menu structure. This device is designed to provide real-time information that will keep your Genie boom lift up and running, maximizing your customers' productivity and your rental return on invested capital (rROIC). The Genie Tech Pro Link handheld device is currently compatible for use with the CAN-enabled control systems on mid-sized Genie S® telescopic Xtra Capacity™ (XC™) booms.
Click here for more information
ApplicationProvides real-time information that will keep your Genie boom lift up and running.
Genie® Lift Power™
The Genie Lift Power™ system includes a new generation of hydraulically driven generators for your customers, and their operators, who relay on productive power at the platform to get their work done. This new configuration is a significantly different design from its predecessor system. Instead of relying on the lift circuit or drive hydraulic circuit, this new generator system runs on a stand-alone circuit with a separate hydraulic pump to supply continuous power. This contemporary accessory allows your customers to lift, drive and power tools, such as heavy-duty welders, for increased productivity.Learn more about Lift Power™
Click here for insights and specifications
Click here to check out the video on how Lift Power works
ApplicationAllows you to lift, drive and power tools, such as heavy-duty welders, for increased productivity.
Genie® Operator Protective Structure (OPS)The Genie OPS is an optional device for installation on an S or Z boom lift and provides secondary protection for operators in the event of contact with an overhead obstacle in certain applications. The Genie OPS features a tubular steel structure designed to transfer the kinetic energy into surrounding structures while maintaining a protected area for the operator. The device can be attached to boom lifts with 6 ft. to 8 ft. platforms and allows for excellent visibility. It weighs 36 lbs. and is bolted directly on the boom lift’s platform; no modifications are needed.
ApplicationProvides secondary operator protection in work near overhead obstacles.
Genie® Fall Arrest BarThe Genie Fall arrest bar* accessory for ANSI and CSA boom lifts is an exciting addition to any fleet. The fall arrest bar is available for either 6 ft. or 8 ft. platforms and quickly attaches on nearly all Genie booms. The accessory allows a user to exit the platform and work comfortably outside of the platform with a 6 ft. shock absorbing lanyard.
Watch this short video for more information
Click here for more information
ApplicationAllows a user to exit the platform and work comfortably at height.
- 1256377GT 8ft. word decal
- 1256378GT 6ft word decal
- 1261018GT 8ft. French decal
- 1261019GT 6ft. French decal
Genie® Tool TrayThis easily-installed tool tray is designed to help eliminate clutter and potential tripping hazards by providing operators and workers with a convenient place to store their tools, fasteners and small materials in the platform.
ApplicationTo hold tools needed for the job including: screws, bolts, and cleaning supplies.
- 9599-SGT works on all platforms with round rails.
Genie® Swing GateThe swing gate replaces the standard sliding mid-rail for walk-in access to the platform. This allows for easy entry and exit when wearing a tool belt, carrying a tool box, or loading materials into the platform.
ApplicationHelps people enter into the platform and bring materials with them more efficiently.
- 119950 available on all boom lifts
Genie® Pipe Cradle
Designed, tested and approved by Genie, pipe cradles reduce the risk of fatigue by providing a secure way to lift pipes when working from a scissor lift or even an S or Z boom lift. Genie pipe cradles deliver stability and rigidity with a robust design which transfers the load away from the guard rails and onto the platform deck. The pipe cradle assembly mounts easily to the platform guardrails with U-bolts and rests on the floor of the platform when installed.
Maximum Capacity Rating: 200 lbs.
ApplicationAssists in installing materials such as: Pipes, sprinkler systems, plumbing.
- 85300GT available on all S and Z boom lifts (Must order 2 per machine).
- 72878GT (available on GS-2046, GS-2646, GS-3246)
- 131626GT (available on GS-2668, GS-3268, GS-2669, GS-3369, and GS-4069)
- 131627GT (available on GS-3384, GS-3390, GS-4390, GS-5390)
Genie® Panel Cradle
The boom lift panel cradle package allows an operator to lift panels up to 250 lbs. outside the existing guard rails of the boom platform. It includes two cradles with hardware, two high density pads, and a load retaining strap. The cradles can be mounted on the end of the platform or on the side, increasing productivity. The two high density pads can also be placed in any position on the rails to protect the panel.
Maximum Capacity Rating: 250 lbs. (boom); 160 lbs. (scissor). Panel cradle option is available on select scissor models. Contact Genie parts for more information.
ApplicationAssists in installing materials such as: windows, panels, drywall.
- 77683GT available on all S™ and Z™ boom lifts except for the Z-40, Z-34/22, and Z-20/8.
- 1251827GT available for GS™-2046 and GS-2646 (parts differ from boom panel cradle).
Genie® Lift Guard™ Contact AlarmThe Lift Guard™ Contact Alarm is designed to alert ground personnel when an operator makes contact with the platform control panel, interrupting boom movement, sounding an alarm and flashing a warning light. The system is designed to be unobtrusive, featuring a activation cable fitted above the boom lift’s control panel. When the activation cable is tripped, the lift and drive functions are disabled at the platform. Then audio and visual warnings will activate alerting others that assistance may be needed. These notifications will continue until the system is reset — simply click the activation cable back into place.
Click here for more information
Click here to check out the walkaround video
ApplicationProvides secondary operator protection in work near surrounding obstacles.
- 1279134GT, 6-ft & 8-ft platform, ALC1000
- 1279135GT, 6-ft & 8-ft platform, NON-ALC1000