环保型高空作业平台
绿色节能引领当今时代潮流
当前全世界的能源观念都在产生变化，环保问题已经成为不同国家和地区必须考虑的核心问题之一。针对 CO2 排放和噪声污染的法规越来越严格，并且在不久的将来许多城市将不再允许使用柴油发动机。针对此现状，我们推荐您使用吉尼的混合动力、双能源和新一代全电动高空作业平台，实现双赢。
绿色节能的高空作业平台主要提供以下三类模式供您选择：
| 混合动力 | 全电动 |
吉尼的混合动力技术是专门针对臂式高空作业平台研发的全新技术，满足了当今时代的高性能、高效率和低排放的发展需要。真正做到了绿色节能高效，同时适用于室内和室外，投资小，运营成本低，回报高，是面对苛刻环境下施工问题的出色选择。
Z-60 FE
曲臂型高空作业平台
一台机器，两台性能。Genie® Z®-60 FE 混合动力曲臂型高空作业平台不仅能提高作业效率，降低作业成本，同时兼顾了环保清洁，是广大用户的理想选择。在“全电动”模式下，该平台一次充电即可正常运行一天且全程零排放。在“混合动力”模式下，一箱油可供设备正常运行一周。
概述
• 全时主动摆动轴，有助于在粗糙地面上行驶时维持牵引力
• 四轮驱动，爬坡角度 45%，出众的全地形适应能力
• 高效的四轮驱动系统，动力强劲，维护简便
• 两种操作模式：全电动和混合动力，效率高且适用各种地形
• 双平行四边形提升结构和全比例控制使得曲臂的定位更精准，性能更平稳
• 1.52 米（5 英尺）曲臂，可在 135°范围内垂直旋转，确保工作人员的精确定位
• 吉尼快速臂杆升降系统使操作员下降取回物料，然后返回工作高度的时间更短
| Specification | Value |
|---|---|
| 最大工作高度 | 65 英尺 7 英寸 | 20.16 米 |
| 最大水平范围 | 36 英尺 7 英寸 | 11.15 米 |
| 最大上方间隙（冒口伸出） | 24 英尺 3 英寸 | 7.39 米 |
| 低于地面深度 | 8 英尺 1 英寸 | 2.46 米 |
| 平台载重能力 | 500 磅 | 227 公斤 |
图片和视频
相关产品、附件和配件
-
![Genie Z-80/60 articulating boom lift]()
Z-80/60
Genie® Z®-80/60 曲臂型高空作业平台具备多项升降功能，提供出色的向上和向外跨越定位，且具有行业卓越的延展性 ， 非常适合室外建筑和工业应用等场合。
-
![Genie Z-34/22 articulating boom lift]()
Z-34/22 DC
Genie® Z®-34/22 DC 电动曲臂型高空作业平台噪音低，零污染。操作员可借助吉尼电动曲臂式高空作业平台轻松靠近建筑物或障碍物进行施工，也可以在过道或其他拥挤区域进行高空作业。
-
![Genie Z-40/23N RJ articulating boom lift]()
Z-40/23 N
Genie® Z®-40/23 N 电动曲臂型高空作业平台尺寸小，采用环保型交流驱动系统，运行时噪音低，零污染，可以在最敏感的工作环境中使用。操作员借助这款吉尼迷你型电动高空作业平台，可以轻松通过标准的双门道，也可以在过道或其他拥挤区域进行高空作业。
-
![Z-45/25 JDC]()
Z-45/25J DC
Genie® Z®-45/25J DC® 电动曲臂型高空作业平台噪音低，零污染。操作员可以借助吉尼电动臂式高空作业平台轻松地靠近建筑物或跨越障碍物工作，也可以在过道或其他拥挤区域进行高空作业。
-
![Genie Lift Guard Contact Alarm]()
Genie® Lift Guard™ 接触式报警器
Lift Guard™ 接触式报警器可在操作员与平台控制面板接触时中断平台运动、发出警报并闪烁警告灯，从而提醒地面人员。此系统的设计不显眼，配有安装在高空作业平台控制面板上方的启动电缆。 当启动电缆跳闸时，平台的举升和驱动功能禁用。系统随后会启动声音和视觉警告，警告其他人可能需要帮助。这种通知一直持续到系统重置为止 - 只需将启动电缆弹回原位即可。
Related News
-
![高空车选购]()
-
![吉尼客户价值故事]()
-
![剪型高空作业平台]()
-
![高空作业平台案例]()
-
![海南会展中心安全建设]()
-
![吉尼客户价值故事]()
-
![Genie Scissor Lift]()
Clearing Up the Confusion: Fall Protection Requirements on Group B MEWPs
When it comes to using fall protection equipment for on mobile elevating work platforms (MEWPs), many still do not fully understand, or comprehend, the requirements in the ANSI A92 and CSA B354 standards, as well as the OSHA and OHS requirements, for fall protection on MEWPs in the United States and Canada.
Full Story of Clearing Up the Confusion: Fall Protection Requirements on Group B MEWPs -
![COPY IMAGE 2 - S-85_XC_Azzura-1199]()
Updated Training Requirements
One of the biggest challenges facing our industry today is how to increase awareness about why safety training is so important. As the North American aerial industry implements the new ANSI and CSA standards changes, companies need to understand their responsibilities regarding training requirements for Mobile Elevating Work Platforms (MEWPs).
Full Story of Updated Training Requirements -
ANSI & CSA Standards | Ask Me Anything June 10th-14th, 2019
Welcome to Ask Me Anything with Scott Owyen on the new ANSI and CSA Standards!
Full Story of ANSI & CSA Standards | Ask Me Anything June 10th-14th, 2019 -
Purchasing MEWPs Compliant with Regional Standards
In the United States, the Occupational Safety and Health Administration, or OSHA, is the primary enforcement agency for mobile elevated work platform (MEWP), or commonly known as aerial work platform (AWP), safety on the jobsite.
Full Story of Purchasing MEWPs Compliant with Regional Standards -
The Brand Matters When Purchasing Used MEWP Equipment
There are reasons some aerial work platforms (AWP) is considered a top-tier brand, maintains its value and garners a fairly premium price in the used market.
Full Story of The Brand Matters When Purchasing Used MEWP Equipment -
HBV, Spelle Germany Adds 105 Meters of Working Height to Its Fleet
This January, family-owned rental company HBV Hydraulikbühnen-Verleih GmbH (HBV), based in Spelle, northwestern Germany, received delivery of three Genie® Xtra Capacity™ (XC™) telescopic boom lifts.
Full Story of HBV, Spelle Germany Adds 105 Meters of Working Height to Its Fleet -
How Aerial Operator Protection Evolves
When developing new operator protection technology, you must reach beyond equipment and listen to the workers who are using it each and every day.
Full Story of How Aerial Operator Protection Evolves -
A92 Minute: Supervisor Training
Check out this Genie A92 Minute on conducting Supervisor Training in accordance with the updated ANSI A92 and CSA B354 Standards.
Full Story of A92 Minute: Supervisor Training -
![COPY IMAGE - Z-60-37FE-06]()
What Constitutes Proper MEWP Training?
One of the biggest challenges facing our industry today is how to increase awareness about why safety training is so important.
Full Story of What Constitutes Proper MEWP Training? -
![Genie TZ Boom]()
Recap of the Pending ANSI/CSA Standards - Everything is Changing
ANSI (United States) and CSA (Canada) standards have, for almost four decades, provided best practices for safe, reliable access to work at height and have delivered a consistent benchmark for safe machine design in North America.
Full Story of Recap of the Pending ANSI/CSA Standards - Everything is Changing -
![Genie Telescopic Boom]()
Big Changes Coming to ANSI A92 Standards
The new standards are based on an ISO model, so they are very similar to the current European EN280 standard. As a global manufacturer, Genie can leverage our experiences in Europe to help with the transition, but we have to remember that North American aerial operators are very different.
Full Story of Big Changes Coming to ANSI A92 Standards -
![Genie Telescopic Boom]()
Start Preparing Now for the New Aerial Standards Coming
With Tier 4 emissions standards compliance underway, we now need to turn our attention to the next “big thing” to impact the aerial rental market — pending changes to the ANSI A92/CSA B354 standards series* (which cover all North American aerials).
Full Story of Start Preparing Now for the New Aerial Standards Coming -
![Genie Z Boom]()
How Industry Regulations and Standards Work
With the pending changes to ANSI 92* and CSA B354 standards, there is a need for education in the aerial market about the implications of the new standards, as well as how they will work with current industry regulations.
Full Story of How Industry Regulations and Standards Work -
![Genie GRC]()
Language and Terminology Changes in the ANSI A92 and CSA B354 Standards Updates
ANSI A92 and CSA B354 standards are about to get a facelift. Pending standards changes, which are estimated to go into effect this year, are written to be more in line with the ISO model so standards will be in global alignment for trade and exporting.
Full Story of Language and Terminology Changes in the ANSI A92 and CSA B354 Standards Updates -
![Genie Articulated Boom Lift]()
Changes to the ANSI and CSA Standards You Need to Know About
The current ANSI and CSA standards for safe use and training have not been updated for many years (the current ANSI boom, scissor lift and manually propelled standards were last updated in 2006, and CSA standards go back even further).
Full Story of Changes to the ANSI and CSA Standards You Need to Know About -
![Genie Stick Boom]()
Eight Stages of Risk Assessment
With so much changing in the updated ANSI/CSA standards, it is important to call attention to one key item that every user (identified in the standards as employers) needs to be aware of.
Full Story of Eight Stages of Risk Assessment -
![Genie Z Boom]()
Frequently Asked Questions About the Upcoming ANSI/CSA Standards Changes
With the pending changes to the ANSI A92 and CSA B354 estimated to go into effect in 2020, it is important for you to start preparing your business and your customers now for what will be different.
Full Story of Frequently Asked Questions About the Upcoming ANSI/CSA Standards Changes -
![Genie Scissor Lift]()
Big Changes, Little Changes Are Coming
In addition to the terminology and language changes in the new ANSI A92 and CSA B354 standards, which are projected to go into effect in 2020, the standards also include several big changes to the equipment itself.
Full Story of Big Changes, Little Changes Are Coming -
![Genie Load Sense]()
Preparing for Platform Load Sense
Changes to ANSI A92 and CSA B354 standards are coming; we expect to the standards to go into effect in 2020. One of the more significant equipment changes coming from the updated standards will be the addition of platform load sense.
Full Story of Preparing for Platform Load Sense -
![Genie Stick Boom]()
Responding to the New Normal
Changes to North American standards (ANSI A92 in the United States and CSA B354 in Canada) are expected to come in 2018 and will create a new “normal” for mobile elevated work platforms (MEWPs), formerly known as aerial work platforms (AWPs), worldwide.
Full Story of Responding to the New Normal -
![Genie Z-33/18]()
Addressing the Challenges of the Upcoming Changes to the ANSI A92 Standards
The upcoming implementation of the new ANSI A92.22 Safe Use and A92.24 Training Standards for Mobile Elevating Work Platforms (MEWPs) in the United States is creating quite a bit of confusion in the industry.
Full Story of Addressing the Challenges of the Upcoming Changes to the ANSI A92 Standards -
Case Study: Electrical Training Alliance Partners with Genie to Offer Aerial Operators’ Training for the New Generation of Apprentices and Journeymen
Full Story of Case Study: Electrical Training Alliance Partners with Genie to Offer Aerial Operators’ Training for the New Generation of Apprentices and Journeymen
吉尼 100% 全电动曲臂型高空作业平台和剪型高空作业平台配有全新的交流驱动系统，运行状态下噪音低，零污染，清洁高效，非常适合对环境要求十分敏感的施工现场，满足国家对于噪音污染和CO2排放的相关规定。此外，这些全电动设备还是日间和夜间城市应用场合的理想选择，操纵性能出色，在繁忙拥挤的施工现场也能做到游刃有余。
-
![Genie GS-4069 DC rough terrain scissor lift]()
GS-2669 DC
全电动Genie® GS™-2669 DC 粗糙地面剪型高空作业平台安静且零排放，是室内外各种用途的理想选择。因其尺寸小，该平台还适用于室内狭小空间。此外，其越野性能使得其非常适合在崎岖地面、沙地和泥泞地区进行建筑施工、维护和安装。
了解更多Specification Value 最大工作高度 31 英尺9 英寸 9.70 米 载重能力 1,500 磅 680 公斤 机器宽度 5 英尺 9 英寸 1.75 米 机器长度 10 英尺3 英寸 3.12 米 重量 7,588 磅 3,442 公斤 -
![Genie Z-33/18 articulating boom lift]()
-
![Genie GS-4069 DC rough terrain scissor lift]()
GS-3369 DC
全电动Genie® GS™-3369 DC 粗糙地面剪型高空作业平台安静且零排放，是室内外各种用途的理想选择。因其尺寸小，该平台还适用于室内狭小空间。此外，其越野性能使得其非常适合在崎岖地面、沙地和泥泞地区进行建筑施工、维护和安装。
了解更多Specification Value 最大工作高度 38 英尺6 英寸 11.75 米 载重能力 1,000 磅 454 公斤 机器宽度 5 英尺9 英寸 1.75 米 机器长度 10英尺 3 英寸 3.12 米 重量 7,987 磅 3,623 公斤 -
![Genie Z-40/23N RJ articulating boom lift]()
-
![Genie Z-40/23N RJ articulating boom lift]()
Z-40/23 N RJ
Genie® Z™-40/23 N RJ 电动曲臂型高空作业平台设计结构紧凑，配有最新一代环保交流驱动系统，运行时低噪音，零排放，经济高效，是敏感、拥挤的市区工作环境的理想选择。配有旋转臂，可以提供业内领先的水平旋转以及标准的垂直臂展，用途更加广泛。
了解更多Specification Value 最大工作高度 46 英尺 5 英寸 14.32 米 最大水平范围 22 英尺 8 英寸 6.91 米 最大上方间隙（冒口伸出） 21 英尺 3 英寸 6.48 米 平台载重能力 500 磅 227 公斤 -
![Genie GS-4069 DC rough terrain scissor lift]()
GS-4069 DC
全电动Genie® GS™-4069 DC 粗糙地面剪型高空作业平台安静且零排放，是室内外各种用途的理想选择。因其尺寸小，该平台还适用于室内狭小空间。此外，其越野性能使得其非常适合在崎岖地面、沙地和泥泞地区进行建筑施工、维护和安装。
了解更多Specification Value 最大工作高度 46英尺3 英寸 14.12 米 载重能力 800 磅 363 公斤 机器宽度 5 英尺9 英寸 1.75 米 机器长度 10 英尺 3 英寸 3.12 米 重量 10,604 磅 4,810 公斤 -
![Z-45 DC]()
-
![Genie Z-60/37 DC or FE articulating boom lift]()
