Boom & Scissor Lift Accessories

The new extra-large 13 ft / 4 m platform provides the ability to get more work done, faster and more comfortably.

• 1312552GT - Tri-Entry 13 ft | 4 m Platform Kit
  Genie® S®-45 XC™, S-45 TraX™, S-65 XC, S-65 TraX, S-85 XC
• 1312373GT* - Off-Center Transport Lock (OCTL) Kit
  Genie S-45 XC & S-45 TraX
• 1312374GT* - Off-Center Transport Lock (OCTL) Kit
  Genie S-65 XC & S-65 TraX
• 1312375GT* - Off-Center Transport Lock (OCTL) Kit
  Genie S-85 XC

Like a traditional tonal alarm, the new White Noise Alarm sounds when a mobile elevating work platform travels forward or in reverse, or moves up or down.

• Factory fit available:
  GS™-30 series, 32 series, 46 series, GS-4655
  Z®-40- Parts #1313257GT
  GTH™ Telehandlers

• GS-69 DC/RT, GS-90 Series
  S® Telescopic Booms
  Z® Articulating Booms, Except Z-40 -Expected 2023

Designed to help eliminate clutter and potential tripping hazards for operators in a platform.  

Provides operators and workers with a convenient place to store their tools, fasteners and small materials in the platform. 

• 1275089GT

Allows operators to place materials outside of the platform for access at height. It includes the cradle, two foam cushions and a load retaining strap.

For use lifting drywall, glass panes, plywood and other material that comes in panels up to 250 lb (113.4 kg). The combined weight of the attachment, panels, occupants and tools must not exceed the platform rated capacity

• KIT Number: 1298841GT

*Not compatible with the old style bolt on platform toeboards, for platforms with the bolt on toeboard and for platforms manufactured before 2016, use P/N 77683GT

A hinged cover to pull down over the platform controls when the boom is not in operation.  

This accessory helps to prevent loose debris from getting into the control box.

• 102854GT

This accessory is an additional railing system that can be quickly and easily mounted on the outside of a Genie boom’s standard platform rails.  

This railing system adds an extra measure of security for the operator when working at height. 

• 1291495GT – 6 ft (1.8 m) platform with swing gate
• 1291496GT – 8 ft (2.4 m) platform with swing gate

The new Genie® Lift Tools™ Access Deck for boom lifts provides operators with a secondary surface to work from, elevating them 22 in (0.56 m) above the platform floor. Attached to the platform midrail, this additional access enables operators to get into restricted spaces to increase productivity.

Providing more than 3 sq ft (0.27 m) of additional work area in the platform, this accessory is designed for use on jobsites where operators in a standard boom platform cannot reach their work. This additional access is ideal for use in HVAC, electrical, lighting, plumbing and welding applications, as well as between rafters or other structures at height. It is rated for both indoor and outdoor use.

• KIT Number: 1291798GT

Designed to make operators more efficient when working at height, the Genie^® Lift Tools™ Expo Installer allows for precise, easy placement of signs, banners and hanging décor. Ideal for use in convention centers, arenas, malls, theaters and other locations that decorate with suspended ornamentation, this new accessory helps to maximize safe productivity while operating Genie booms.

This is an indoor-use only aftermarket accessory, available through Genie Genuine Parts, designed for 6-ft and 8-ft articulating and telescopic boom platforms. This new option allows operators to hang signs, banners and décor at height.

• 1285719GT 6ft KIT ANSI/CSA Word Decals
• 1290034GT 6ft KIT CSA French Decals
• 1288801GT 8ft KIT ANSI/CSA Word Decals
• 1290036GT 8ft KIT French Decals

Genie® protective solutions continue to evolve to meet the demands of today’s aerial jobsites. The Genie Lift Guard™ Platform Mesh family of accessories is designed to prevent dropped objects falling from aerial worksites. With two options to choose from — half-height aluminum and full-height aluminum, these contemporary mesh accessories engineered to help operators keep jobsite materials and tools from falling out of boom platforms working at height.

• 1283049GT Kit, 8’ Full Mesh, Side Gate
• 1286622GT Kit, 6’ Full Mesh, Side Gate
• 1290896GT Kit, 8’ Full Mesh, Front Gate
• 1290895GT Kit, 6’ Full Mesh, Front Gate

• 1275281GT Kit, 8’ Half Mesh, Side Gate
• 1275282GT Kit, 6’ Half Mesh, Side Gate
• 1290894GT Kit, 8’ Half Mesh, Front Gate
• 1290893GT Kit, 6’ Half Mesh, Front Gate

• 1283049GT Kit, 8’ Full Mesh, Side Gate
• 1286622GT Kit, 6’ Full Mesh, Side Gate
• 1290896GT Kit, 8’ Full Mesh, Front Gate
• 1290895GT Kit, 6’ Full Mesh, Front Gate
• 1275281GT Kit, 8’ Half Mesh, Side Gate
• 1275282GT Kit, 6’ Half Mesh, Side Gate
• 1290894GT Kit, 8’ Half Mesh, Front Gate
• 1290893GT Kit, 6’ Half Mesh, Front Gate Genie Operator Protective Structure
• 219158GT Operator Protective Structure Genie Fall Arrest Bar
• 1256377GT - 8 ft (2.4 m) Word decal
• 1256378GT - 6 ft (1.8 m) Word decal
• 1261018GT - 8 ft (2.4 m) French decal
• 1261019GT - 6 ft (1.8 m) French decal Genie Lift Guard Contact Alarm
• 1279134GT - 6 ft (1.8 m) - 8 ft (2.4 m) platform ALC
• 1279135GT - 6 ft (1.8 m) - 8 ft (2.4 m) platform NON-ALC
• 1279136GT - 1.17 m (3 ft 10 in) - 1.42 m (4 ft 8 in) platform NON-ALC
• 1283807GT - 1.17 m (3 ft 10 in) platform, Z-33/18 only

• 1276686GT

• 219158GT

• 1256377GT 8ft. word decal
• 1256378GT 6ft word decal
• 1261018GT 8ft. French decal
• 1261019GT 6ft. French decal

• 119950 available on all boom lifts

Designed, tested and approved by Genie, pipe cradles reduce the risk of fatigue by providing a secure way to lift pipes when working from a scissor lift or even an S or Z boom lift. Genie pipe cradles deliver stability and rigidity with a robust design which transfers the load away from the guard rails and onto the platform deck. The pipe cradle assembly mounts easily to the platform guardrails with U-bolts and rests on the floor of the platform when installed.

Maximum Capacity Rating: 200 lbs.

• 85300GT available on all S and Z boom lifts (Must order 2 per machine).
• 72878GT (available on GS-2046, GS-2646, GS-3246)
• 131626GT (available on GS-2668, GS-3268, GS-2669, GS-3369, and GS-4069)
• 131627GT (available on GS-3384, GS-3390, GS-4390, GS-5390)

• 1279134GT, 6-ft & 8-ft platform, ALC1000

• 1279135GT, 6-ft & 8-ft platform, NON-ALC1000

Many jobsites require operators to access restricted areas above or beyond where a scissor lift’s platform can reach. This accessory provides operators with a secondary surface to elevate them above the platform floor for a productive solution to access hard-to-reach areas.

This additional deck installs to the inside of the extension deck guardrails on Genie® GS™-1930, GS-1932 scissor lift platforms as well as Genie® GS™-1432m and GS-1932m micro slab scissors (with an additional adapter). It is designed with a collapsible guardrail to ensure uninhibited maneuverability for operators using the accessory.

• 1291517GT for GS™-1930 and GS-1932
  (225 lb weight capacity)
• 1321967GT for GS™-1432m and GS-1932m
  (222 lb weight capacity)

The new Genie^® Lift Tools™ Material Carrier attachment offers Genie GS™-2669, GS-3369 GS-4069, GS-3390, GS-4390 and GS-5390 DC and RT rough terrain scissor lift operators a solution to efficiently carry materials to jobsites. Designed to accommodate a wide range of materials and higher load capacities than a standard pipe cradle attachment, this new Genie accessory is ideal for use in applications that require lifting materials to height, such as tilt-up construction, post-frame building construction, fire suppression installation, HVAC installation, rooftop contracting and facility maintenance.

The large carriage and high capacity of the Genie Lift Tools Material Carrier attachment is suitable for multitude of material types, including lumber, pipe, HVAC materials, siding and plate material.

• KIT 1288239GT, available as an aftermarket part

The Genie Lift Power™ system includes a new generation of hydraulically driven generators for your customers, and their operators, who rely on productive power at the platform to get their work done. This new configuration is a significantly different design from its predecessor system. Instead of relying on the lift circuit or drive hydraulic circuit, this new generator system runs on a stand-alone circuit with a separate hydraulic pump to supply continuous power. This contemporary accessory allows your customers to lift, drive and power tools, such as heavy-duty welders, for increased productivity.  

Reduce costly leaks with the Genie® Lift Tool™ Spill Guard. Designed to contain hydraulic leaks, it is simple to install and easy to service.

Work over sensitive surfaces without concern. A field retrofit takes less than 15 minutes. One-time installation with easily-replaceable absorbent pads.

• GS -1432m E-Drive
• GS-1932m E-Drive
• GS-1930/1932 E-Drive
• GS-2032 E-Drive
• GS-2046 E-Drive
• GS-2632 E-Drive
• GS-2646 E-Drive
• GS-3232 E-Drive
• GS-3246 E-Drive
• GS-4046 E-Drive