S-80 XC and S-85 XC
Genie® S®-80 XC™ and S®-85 XC telescopic booms offer a dual lift capacity of 660-lb (300 kg) unrestricted and 1,000-lb (454 kg) restricted to perform a wider range of heavier lift tasks on construction and indu...
Genie® S®-40 and S®-45 telescopic booms increase productivity with the traction and drive speed needed to get around jobsites and work areas. These units are designed to easily maneuver in tight spaces on construction and industrial sites.
Overview
Specification | Value |
---|---|
Max Working Height | S-40: 46 ft/ S-45: 51 ft | S-40: 14.20 m/ S-45: 15.72 m |
Max Horizontal Reach | 31 ft 8 in | 9.67 m |
Below Ground Reach | 3 ft 2 in | 0.97 m |
Platform Capacity | 500 lb | 227 kg |
Machine Width and Length | S-40: 7 ft 6 in, 24 ft 3 in / S-45: 7 ft 6 in , 27 ft 10 in | S-40: 2.30 m, 7.39 m / S-45: 2.30 m, 8.48 m |
Chassis Options
Tire Options
Engine Options
Lift/Turntable Options
Platforms
Platform Options
Although not a common occurrence, aerial equipment — like all machinery — can be involved in an incident that causes damage to the unit.
Continue Reading
Transporting a large piece of aerial equipment can be a challenge, and safety is the key ingredient.
Continue Reading
Soon all Genie® GS™ scissor lifts and GR™, QS™ & GRC vertical mast lifts will be manufactured in compliance with applicable national standards adopted by each country, which drive differences to machine design.
Continue Reading
Sticking to a regular maintenance routine, including the important daily tasks as outlined in the operator’s manual, helps to ensure that scissor lifts are ready to work when they are needed.
Continue Reading
A pre-operation inspection is a visual inspection of a mobile elevating work platform (MEWP) performed by the operator prior to each work shift.
Continue Reading