S-60 XC and S-65 XC

Telescopic Boom Lift

Genie S-65 XC - Xtra Capacity telescopic boom lift

Able to perform a wider range of heavier lift tasks on construction and industrial jobsites with Genie® S®-60 XC™ and S-65 XC telescopic booms — offering a dual lift capacity of 660-lb (300 kg) unrestricted and 1,000-lb (454 kg) restricted. The Genie Xtra Capacity™ (XC) feature lets up to three people work onboard with room for tools and jobsite materials.

Overview

  • Maximum capacity with a robust jib design to handle increased loads
  • Load sense technology for accurate load weighing and zero-load field calibration
  • Chassis tilt sensor technology maximizes access to hard-to-reach work areas
  • Onboard diagnostics maximizes serviceability
  • Option to add the new Genie Lift Power™ generator system

Due to the delays in updating the ANSI A92 standards, Genie has temporarily suspended the production of the new Genie® S-60 XC™, S-65 XC and Z-45 XC booms*. Current Genie S-60, S-65 and Z-45 models will continue to be available for purchase until further notice.

* Please check back often for production updates on these units.

Specification Value
Max Working Height S-60 XC: 66 ft / S-65 XC: 71 ft | S-60 XC: 20.30 m / S-65 XC: 21.80 m
Max Horizontal Reach S-60 XC, 50 ft 10 in / S-65 XC, 54 ft 2 in | S-60 XC, 15.49 m / S-65 XC, 16.51 m
Below Ground Reach 5 ft 7 in | 1.70 m
Platform Capacity 660 lb Unrestricted, 1,000 lb Restricted | 300 kg Unrestricted, 454 kg Restricted
Machine Width and Length 8 ft 2 in, 31 ft 11 in | 2.49 m, 9.73 m
Range of motion - Genie S-60 XC and S-65 XC telescopic boom lifts

Chassis Options

  • Tow package

Tire Options

  • S-60 XC Trax or S-65 XC Trax: Quadra Track System              
  • Rough terrain, foam-filled tires (petroleum based)                                                                              
  • Rough terrain, non-marking, foam-filled tires (water based)                                        
  • Rough terrain, non-marking, foam-filled tires  (petroleum based)                    

Engine Options

  • 60 hp Ford MSG425, gas/LPG Dual Fuel (not available on S60/65 Trax)
  • 74 hp Deutz Tier 4f TD2.9L4, turbo diesel (standard with Trax)
  • Diesel intake air pre-cleaner
  • LPS Fire protection rating: Ford engine only and requires LP only operation
  • Cold weather kit:  5W-40 synthetic engine oil, oil pan heater, battery heater and hydraulic tank heater
  • Ford engine gauge package: oil pressure, temperature and voltage

Lift/Turntable Options

  • Specialty hydraulic oil (60 gal - cold weather, fire resistant, or biodegradable)
  • LPG tank, 33.5 lb. capacity: Ford engine only
  • Second battery
  • Hostile environment kit: cylinder bellows, boom wiper seals, platform and ground control box covers
  • Deluxe hostile environment kit: hostile environment kit, ring gear guard, cable track hose cover, air pre-cleaner

Platforms

  • 4 ft. front-entry steel platform
  • 6 ft. dual entry or 8 ft. tri entry platform with ½ height mesh inserts and side swing gate
  • 6 ft. dual entry platform with side swing gate

Platform Options

  • Lift Power™ 3kW AC generator, 110V/60Hz or 220V/50Hz
  • Air line to platform: ½ in. inner diameter
  • Aircraft protection kit:  platform foam padding and padded disable system
  • Aircraft protection kit: with swing gate
  • Light package: 2 chassis mounted drive lights and 2 platform mounted work lights
  • Lockable platform and ground control box covers
  • Panel cradle package
  • Platform auxiliary top rail
  • Thumb rocker steering
  • Lift Power™ 12kW Welder - Select Lincoln or Miller
  • Lift Power™ 12kW Welder Ready package
  • Traveling fall arrest anchor system: requires 6ft platform
  • Traveling fall arrest anchor system: requires 8ft platform

Aerial Pros Tile Thumbnail

Tips for Using the Genie Smart Link™ Dual Zone Controls

Soon, all Genie® GS™ scissor lifts and GR™, QS™ & GRC vertical mast lifts will be manufactured in compliance with applicable national standards adopted by each country

Continue Reading

...
Aerial Pros Tile Thumbnail

Daily To Do’s: Perform Pre-Operation Inspections on Genie MEWPs

A pre-operation inspection is a visual inspection of a mobile elevating work platform (MEWP) performed by the operator prior to each work shift.

Continue Reading

...
Aerial Pros Tile Thumbnail

Benefits of Preventive Maintenance for MEWP Rental Fleets

As is the case with all equipment, mobile elevating work platforms (MEWPs) require regular, preventive maintenance to maintain peak performance. Ensuring a MEWP gets the maintenance it needs is not only important to safety, but to performance as well.

Continue Reading

...
Aerial Pros Tile Thumbnail

Small Booms, Big Productivity

With many size classifications of boom lifts available, understanding key features and benefits offered by each size of machine can help you ensure the right lift for the job, maximizing productivity.

Continue Reading

...
Aerial Pros Tile Thumbnail

Guidelines for Safe Transportation of Your Genie® MEWP

As use of mobile elevating work platforms (MEWPs) across different industries and applications continues to grow, understanding how to safely load and transport your Genie® MEWP is essential for safety, as well as to protect your investment.

Continue Reading

...