S-65 XC and S-65 TraX

Telescopic Boom Lift

Genie S-65 XC - Xtra Capacity telescopic boom lift

Genie® S®-65 XC™ and  S-65 TraX™ telescopic boom lifts are the redesigned Xtra Capacity™ version of the popular Genie S-65 and S-65 Trax. They can perform a wider range of heavier lift tasks on construction and industrial jobsites thanks to their dual lift capacity and offer innovative features to help increase jobsite efficiency.

 S-65 XC Overview

• Full-time active oscillating axle and full-time positive traction for superior terrainability
• Chassis tilt sensor technology  maximizes access to hard-to-reach work areas
• 1.52 m (5 ft) robust articulating jib
• Dual lifting capacity of 300 kg (660 lb) and 454 kg (1,000 lb) to lift increased loads and up to 3 operators
• Automatic envelope control technology for a smooth operating envelope
•  Zero-load field calibration and onboard diagnostics maximize serviceability

S-65 TraX Overview

•  Zero-load field calibration and onboard diagnostics maximize serviceability
• Full-time active oscillating axle and full-time positive traction help maintain traction on rough terrain
• 4WD and 40% gradeability for superior terrainability
• Patented track design features 4 independent tracks, swivelling vertically up to 20° for a smooth drive on rough ground conditions
• 30° steer angle for easy manoeuvring
• 1.52 m (5 ft) articulating jib with a 135° range of motion to accurately position workers
• 160° hydraulic platform rotation and self-levelling platform for precise platform positioning and easy operation
• Dual lifting capacity of 300 kg (660 lb) and 454 kg (1,000 lb) to lift increased loads and up to 3 operators

Specification Value
Max Working Height 71 ft | 21.81 m
Max Horizontal Reach 54 ft 2 in | 16.51 m
Below Ground Reach 8 ft 8 in | 2.65 m
Platform Capacity 660 lb Unrestricted, 1,000 lb Restricted | 300 kg Unrestricted, 454 kg Restricted
Machine Width and Length S-65 XC: 8 ft 2 in, 32 ft | S-65 TraX: 8 ft 5-11/16 in, 32 ft | S-65 XC: 2.49 m, 9.76 m | S-65 TraX: 2.58 m, 9.76 m
Genie S-60 XC and S-65 XC - Range of Motion

Aerial Pros Tile Thumbnail

Maximum Hybrid Utilization is Just the Start

What if I were to tell you that, with a single hybrid articulated boom, you could efficiently complete both inside and outdoor projects.

Continue Reading

...
Aerial Pros Tile Thumbnail

Why Outsourcing Maintenance Can Be the Right Choice for Your Fleet

For equipment owners, a fully and properly maintained mobile elevated work platform (MEWP) can mean reduced downtime, increased utilization, better rental rates and higher residual values. But, performing maintenance to a high standard requires the right knowledge and training.

Continue Reading

...
Aerial Pros Tile Thumbnail

Tips for Using the Genie® Smart Link™ Dual Zone Controls

Soon, all Genie® GS™ scissor lifts and GR™, QS™ & GRC vertical mast lifts will be manufactured in compliance with applicable national standards adopted by each country, which drive differences to machine design and use due to standards requirements for side force, chassis tilt, wind rating, platform load sensing and various other specifications and stability considerations.

Continue Reading

...
Aerial Pros Tile Thumbnail

Benefits of Preventive Maintenance for MEWP Rental Fleets

As is the case with all equipment, mobile elevating work platforms (MEWPs) require regular, preventive maintenance to maintain peak performance. Ensuring a MEWP gets the maintenance it needs is not only important to safety, but to performance as well.

Continue Reading

...
Aerial Pros Tile Thumbnail

Small Booms, Big Productivity

With many size classifications of boom lifts available, understanding key features and benefits offered by each size of machine can help you ensure the right lift for the job, maximizing productivity.

Continue Reading

...